Dach Plus
| Length of module : | 350 mm*; 400 mm** |
| Redrawing height : | 15 mm*; 20 mm** |
| Front overlap : | 50 mm |
| Back overlap : | 100 mm |
| Shape height : | 23 mm |
| Total width : | 1183 mm |
| Covering height : | 1100 mm |
| Thickness : | 0.5 mm |
| max. length : | 5050 mm* / 5350 mm** |
| Colors : | Color palette |
| Anticorrosive coating : | polyester gloss SP25µm poliester mat SP35µm pural PUR50µm |
|
* - XSARA 350/15 ** - XSARA 400/20 |
|
The sheets are cut to a desired size; their maximal length, however, should not exceed 5050 mm for the 35 mm module and 5350 mm for the 400 mm module. In case when the length of roof slope significantly exceeds the recommended maximal size of sheets, they should be divided. Application of non-standard sheets may become the reason for the future assembly problems.
The XSARA sheet roofing-tile rbegins with a 5cm-long overlap. The length of the overlap depends mainly on the length of the ordered sheet. In case when the length of the back overlap is shorter than 100 mm, the sheet will not have the last redrawing. It means that the last module will be extended by the missing centimeters. Only in the case of the so-called standard sheets the length of the front and back overlaps is always the same - front - 50 mm, back - 100 mm. The length of standard sheets [with complete last redrawing] and the ways of their division are presented alongside.
